aozun
Hydroxypropyl Acrylate (HPA)
CLEAR LIQUID
25584-83-2
C₆H₁₀O₃
130.14 g/mol
247-118-0
soluble in water
| Availability: | |
|---|---|
Product Description
Hydroxypropyl Acrylate (HPA, CAS 25584-83-2) is a hydroxyl-functional acrylate monomer commonly supplied as a mixture of positional isomers. Its acrylate double bond allows it to copolymerize with other monomers. The hydroxyl group remains available for subsequent reactions, such as crosslinking with a suitable curing agent.
HPA offers excellent reactivity and compatibility in polymerization reactions. Below is a summary of its primary physical and chemical properties:
| Property | Value | Notes |
|---|---|---|
| CAS Number | 25584-83-2 | Standard identifier |
| Molecular Formula | C₆H₁₀O₃ | - |
| Molecular Weight | 130.14 g/mol | - |
| Appearance | Clear, colorless liquid | - |
| Purity | ≥99% | Typical grade |
| Density | 1.044 g/mL at 25°C | - |
| Melting Point | -30°C | Low temperature stability |
| Boiling Point | 198.5°C at 1013 hPa | Or 77°C at 5 mm Hg |
| Flash Point | 94°C | Closed cup method |
| Vapor Pressure | 1 Pa at 20°C | Low volatility |
| Refractive Index | 1.442 at 20°C | - |
| Solubility | Soluble in water, alcohols, and most organic solvents | Miscible with many systems |
These specifications make HPA a reliable choice for demanding industrial processes, providing superior crosslinking and flexibility in end products.
Hydroxyl-functional resins: HPA is copolymerized into acrylic resins to provide hydroxyl sites for curing agents. A typical example is an acrylic polyol for a two-component polyurethane coating cured with a polyisocyanate.
Formulation trials: Compare adhesion and solvent resistance on the intended substrate after cure. The resin composition and curing system both affect the result.
Acrylic adhesive polymers: HPA can be used as a functional comonomer in selected acrylic adhesive formulations, including pressure-sensitive adhesives that need sites for crosslinking.
Performance balance: Evaluate tack, peel strength and shear resistance together when changing the HPA level or the crosslinking system.
Acrylate oligomers: The hydroxyl group can react with suitable intermediates while retaining acrylate functionality. This makes HPA useful as a feedstock for certain UV-curable oligomers.
Coatings and inks: These oligomers can be used in selected coatings and inks. Check cure response in the finished formulation, where the photoinitiator, pigment and film thickness can affect the result.
Acrylic binders: HPA can be copolymerized into binders used for selected fiber finishes. Its hydroxyl groups provide sites for further reaction when the binder is designed for crosslinking.
Trial checks: Compare adhesion to the intended fiber and the feel of the treated fabric after drying and cure.
HPA can cause skin sensitization and may polymerize if heated, exposed to light or contaminated with incompatible materials. Avoid skin and eye contact and inhalation. Use suitable ventilation and protective equipment as specified in the safety data sheet (SDS).
Store stabilized material in its original, tightly closed container in a cool place protected from direct light. Follow the supplied SDS for temperature limits and incompatibilities. MEHQ stabilization depends on oxygen, so follow the supplier’s instructions for the storage atmosphere. Use Section 14 of the SDS for the supplied grade when determining transport classification.
HPA under CAS 25584-83-2 is commonly supplied as a mixture of positional isomers. If the isomer ratio affects your process, specify it in your inquiry.
Hydroxyethyl Acrylate (HEA) has a shorter hydroxyalkyl group. Hydroxypropyl Methacrylate (HPMA) has a methacrylate group instead of an acrylate group. All three provide hydroxyl functionality, but substitution can change polymerization or formulation behavior.
No. HPA dissolves in water, but it is not miscible in all proportions. Check compatibility at your intended concentration when developing an aqueous formulation.
MEHQ is an inhibitor used to limit premature polymerization during storage. Compare the inhibitor level when qualifying a new grade, especially if your process is sensitive to cure rate.
For a quote, COA or SDS, tell us your application, required assay and inhibitor range, quantity and destination.
Email: lisa@aozunchem.com
WhatsApp: +86-186-5121-5887